PPC-4107-myq

From Estone Technology Wiki
Revision as of 02:02, 27 May 2019 by Gan (Talk | contribs) (Compiling U-boot)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Compiling PPC-4207 Yocto Image

Setup Yocto Environment

  • Please follow these instructions to setup the yocto environment before compiling the ppc-4207 image

All the following steps have been tested on Ubuntu 16.04.6 LTS. An Internet connection is required to finish this tutorial.

  • Check and install update for Ubuntu by inputing the following commands to shell.
$ sudo apt-get update

Setting up the Ubuntu development host

Open a terminal on host machine(Ubuntu 16.04.6 LTS). Input the following commands to install the pre-required tools:

$ sudo apt-get install gawk wget git-core diffstat unzip texinfo build-essential chrpath
$ sudo apt-get install libsdl1.2-dev xterm 
$ sudo apt-get install curl nano gcc-multilib gettext git lzop bc

Installing and configuring Git

$ sudo apt-get update
$ sudo apt-get install git
$ git config --global user.name "First Last"
$ git config --global user.email "first.last@company.com"

Installing SDK

Download here

Installation

$ chmod +x poky-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-2.1.3.sh
$ sh poky-glibc-x86_64-meta-toolchain-qt5-cortexa9hf-neon-toolchain-2.1.3.sh

Compiling Kernel

$ git clone https://github.com/estonetechnology/imx6qdl-linux-kernel-ppc4107-myq.git
Username for https://github.com: xxxxxxxxx@xxxxxxxx.com
Password for xxxxxxxxx@xxxxxxxxx.com: password
$ source /opt/poky/2.1.3/environment-setup-cortexa9hf-neon-poky-linux-gnueabi $ export ARCH=arm $ export CROSS_COMPILE=arm-poky-linux-gnueabi- $ cd imx6qdl-linux-kernel-ppc4107-myq/ $ make hio-imx6dl-ppc4107-myq_defconfig $ make -j8 zImage $ make hio-imx6dl-ppc4107.dtb

Files require:

zImage (imx6qdl-linux-kernel/arch/arm/boot/zImage)
hio-imx6dl-ppc4207.dtb (imx6qdl-linux-kernel/arch/arm/boot/dts/hio-imx6dl-ppc4207.dtb)

Compiling U-boot

$ git clone -b imx_v2015.04_3.14.52_1.1.0_ga https://github.com/estonetechnology/ppc-4510-linux-uboot
$ source /opt/poky/2.1.3/environment-setup-cortexa9hf-neon-poky-linux-gnueabi 
$ export ARCH=arm 
$ export CROSS_COMPILE=arm-poky-linux-gnueabi- 
$ make hio-imx6dl-board_spl_defconfig 
$ make

Files require:

SPL
u-boot.img

Compiling Rootfs


  • Repo utility installation:
$ mkdir ~/bin
$ curl http://commondatastorage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
$ chmod a+x ~/bin/repo
  • Getting source code:
$ PATH=${PATH}:~/bin
$ mkdir fsl-community-bsp
$ cd fsl-community-bsp
$ repo init -u https://github.com/Freescale/fsl-community-bsp-platform -b krogoth
$ repo sync
$ cd sources/
$ git clone -b krogoth https://github.com/meta-qt5/meta-qt5.git
$ git clone -b krogoth https://github.com/estonetechnology/meta-hio.git
$ git clone -b krogoth git://git.yoctoproject.org/meta-mono
$ cd fsl-community-bsp
$ . ./setup-environment build


Note: From the Build choose 1 set of these 3 configurations "bblayers.conf" & "local.conf" to move to conf/ directory depending on the desired configuration

hio-full-cmdline
$ mv ../sources/meta-hio/conf/hio-full-cmdline-example-local.conf conf/local.conf
$ mv ../sources/meta-hio/conf/hio-full-cmdline-example-bblayers.conf conf/bblayers.conf
hio-qt5-fb
$ mv ../sources/meta-hio/conf/hio-qt5-fb-example-local.conf conf/local.conf
$ mv ../sources/meta-hio/conf/hio-qt5-fb-example-bblayers.conf conf/bblayers.conf
hio-x11
$ mv ../sources/meta-hio/conf/hio-x11-example-local.conf conf/local.conf
$ mv ../sources/meta-hio/conf/hio-x11-example-bblayers.conf conf/bblayers.conf

bitbake image

$ bitbake core-image-full-cmdline

Compiled image: core-image-full-cmdline-hio-imx6dl-iob3200.tar.bz2 (fsl-community-bsp/build/tmp/deploy/images/hio-imx6dl-iob3200/core-image-full-cmdline-hio-imx6dl-iob3200.tar.bz2)